Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Mini Project of intrest.

Status
Not open for further replies.

gannu

Junior Member level 1
Joined
Mar 4, 2011
Messages
17
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,401
Respected members,
For eg: *If from a 200m FM tx if the signal has to be digitally transmitted to the reciever ,then how to modify the circuit so that circuit transmits data bit by bit... or how is it exactly possible ?
*is that possible to convert it to excess-3 code and then at rx side while decoding just subtract the excess-3 ?
*And how is it related to bandwidth?
*Anybody please suggest or give a clear idea..
 

upand_at_them

Full Member level 2
Joined
Feb 26, 2010
Messages
131
Helped
21
Reputation
42
Reaction score
21
Trophy points
1,298
Location
Pennsylvania, U.S.
Activity points
1,941
You need to implement a data transfer protocol. There are many out there, such as AFSK. AFSK uses two audio tones to encode the binary 1 and 0.
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top