lavricalex
Newbie level 3
In my project I want to use a Doppler radar Sensor in order to detect the presence of a car.
So I bought from e-bay the sensor.
**broken link removed**
I connected to the IF output the attached circuit figure (2 X LM324).
Using an oscilloscope at the output i have a 4 V signal which has a frequency of about 50 Hz and when i have movement the frequency shifts to 20 Hz.
My question what circuit i need to connect this sensor to a microcontroller (ADC, DAC inputs) in order to know when a detection occurs.
Best regards,
Alex
So I bought from e-bay the sensor.
**broken link removed**
I connected to the IF output the attached circuit figure (2 X LM324).
Using an oscilloscope at the output i have a 4 V signal which has a frequency of about 50 Hz and when i have movement the frequency shifts to 20 Hz.
My question what circuit i need to connect this sensor to a microcontroller (ADC, DAC inputs) in order to know when a detection occurs.
Best regards,
Alex