Making your own mains filter is dangerous. You could start a fire or electrocute yourself with the wrong design. It is better to buy one. If you insist on making your own, you need to get capacitors rated as X and Y use. X is line to line and Y is line to ground/earth.
Making your own mains filter is dangerous. You could start a fire or electrocute yourself with the wrong design. It is better to buy one. If you insist on making your own, you need to get capacitors rated as X and Y use. X is line to line and Y is line to ground/earth.
It may be any one of them provided the capacitance, and the volatge ratings are same as mentioned or more than that. Generally polyester capacitors are used in Electrical filter deisgns due to thier high voltage capacities. Cheers
If you had ever taken a look at capacitor manufacturer or distributor catalogs, you won't need to ask. You hardly won't find a ceramic capacitor with 275 VAC rating and more than a few 10 nF capacitance. Furthermore, your schematic already suggests a reasonable package size (22.5 mm pin distance). Metallized polyester is basically a good choice.