Aug 4, 2014 #1 K khorramrouz Newbie level 5 Joined Jul 15, 2014 Messages 10 Helped 0 Reputation 0 Reaction score 0 Trophy points 1 Activity points 75 Hi All I,m using Tsmci8rf and there some nmos and pmos in the component list. How can i know the specification of each one? Does 2V and 3V refer to maximum voltage which can be used? best regard
Hi All I,m using Tsmci8rf and there some nmos and pmos in the component list. How can i know the specification of each one? Does 2V and 3V refer to maximum voltage which can be used? best regard
Aug 4, 2014 #2 Dominik Przyborowski Advanced Member level 4 Joined Jun 6, 2013 Messages 1,211 Helped 505 Reputation 1,015 Reaction score 506 Trophy points 1,393 Location Norway Activity points 9,332 You need to check a design manual for this process. The nominal Vdd for 180nm is 1.8V but for some I/O devices a standard is 2.5, 3.3 or 5V. This 2v or 3v could also means threshold voltages.
You need to check a design manual for this process. The nominal Vdd for 180nm is 1.8V but for some I/O devices a standard is 2.5, 3.3 or 5V. This 2v or 3v could also means threshold voltages.