Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Maximum supply voltage for nmos2V andnmos3v in tsmc18rf?

Status
Not open for further replies.
K

khorramrouz

Newbie level 5
Newbie level 5
Joined
Jul 15, 2014
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
75
Hi All
I,m using Tsmci8rf and there some nmos and pmos in the component list. How can i know the specification of each one?
Does 2V and 3V refer to maximum voltage which can be used?
best regard
 

You need to check a design manual for this process. The nominal Vdd for 180nm is 1.8V but for some I/O devices a standard is 2.5, 3.3 or 5V.

This 2v or 3v could also means threshold voltages.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top