Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
I used in aptiva various matlab functions a few years ago to analyze simulation results of an adc. Which version of ADE or ic respectivley, supports matlab? Further is a matlab tollbox necessary for cosimulation`.
could you send some more information about the cadence simulink interface because i coudn't find any doc about that issue. Which ic version supports that tool?
Did anybody have any success in using the co simulation interface?
I am just starting to look into using cadence with simulink.
Following on from the last post the system requirements (from cadence website) are:
Cadence recommends that you use Cadence software version MMSIM 6.1 USR1 or later. With MMSIM 6.1 USR1 and MMSIM 6.2, use MATLAB R14 or MATLAB 2006. With MMSIM 6.2 USR1, use MATLAB 2007B or later
Cadence only support matlab & AMS co-simulation. You should setup one mixed-signal simulation testbench and select ams simulator. Then you add the interface element to simulink/composer. At last run matlab and ams simultaneously.
is anybody familiar with how to use cadence AMS and matlab co-sumulation. when I do it, the cadence tools tell me such messange.
ncvlog: 05.81-p002: (c) Copyright 1995-2006 Cadence Design Systems, Inc.
file: /home/iroi/AMS-MATLAB/simulation/tb_ieee_802_11a_demo_template/ams/config/netlist/ihnl/AMSDcouple/tb_ieee_802_11a_demo_template/schematic/verilog.vams
ncelab: *E,NOTSYT (./ihnl/AMSDcouple/coupler_2_3_a/verilogams/verilog.vams,89|11): Unrecognized system task or function (did not match built-in or user-defined names) [2.7.4(IEEE Std 1364-2001)].
If item was defined in a shared-object library, the problem could be:
libvpi.so: cannot open shared object file: No such file or directory
libpli.so: cannot open shared object file: No such file or directory.
ncelab: *E,NOTSYT (./ihnl/AMSDcouple/coupler_2_3_a/verilogams/verilog.vams,91|20): Unrecognized system task or function (did not match built-in or user-defined names) [2.7.4(IEEE Std 1364-2001)]. ................ Done
ncelab: Memory Usage - 14.4M program + 65.7M data = 80.2M total
ncelab: CPU Usage - 1.1s system + 0.1s user = 1.2s total (1.3s, 93.2% cpu)
Failed to elaborate ("AMSDcouple" "tb_ieee_802_11a_demo_template" "config").
Please i want some help in using fdatool in matlab. I designed my filter but don't know how to apply it to my signal.
I do export the filter as an object or to workspace or as an SOS matrix, or even as an m-file. But i can't apply this filter to my original signal.
How can i get that.
Or if u suggest any other method for me to design a BPF and apply it to my signal.
I've really got confused.
Thanks in advance.
I am trying to run Cadence and Simulink Co simulation using the SimCoupler module provided in the cadence amsdMatSim tutorial.
However the .mex files provided in this tutorial does not match my linux version.
Does anyone know the source to SimCoupler.c file?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.