Mating receptable for DF11-4DP-2DSA

J

jimmykk

Full Member level 3
Joined
Oct 2, 2014
Messages
158
Helped
0
Reputation
0
Reaction score
1
Trophy points
1,298
Activity points
2,863
Hi
I have a module which is using Hirose DF11-4DP-2DSA (Page 10)Straight Pin Header.
I want to mate it with a 4-Pin Through Hole Receptable(don't have space for SMT Type) but Hirose does not offer DF11-4DS-2DSA. It means they don't have any receptable below 6 pins.

I tried using SQT-102-01-L-D from Samtec but this doesn't mate properly with DF11-4DP-2DSA as it is not high enough.
So, wondering what are my options here? Don't want any harness/cable solution.
Just board to board mating.
 

Sort by date Sort by votes
Hi,

if I understand you correctly, you are aiming to create a board-to-board connection without a cable. Unfortunately, the DF11 series is a wire-to-board connector series. Have you considered to replace the DF11-4DP-2DSA by an ordinary pinheader e.g. [1]. Of yourse this depends on the quantity of your module, and if it isn't to time consuming to replace the connector on your module board(s).

[1] https://uk.farnell.com/molex/87758-0416/connector-header-4pos-2row-2mm/dp/7472315

BR
 

Upvote 0 Downvote
You must log in or register to reply here.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…