Hello to all GSM hobbiest,
If you are ready have a serial link cable for S35 Siemens, please connect it to PC-serial.
Use Hyperterminal, set the property to 19200 baud, no parity, 8 bit data, 1 stop bit.
Entry with keyboard:
AT Enter
Must appear the AT char on hyperterminal and return acknowledge from HP with "Ok" string. Else any error with the serial cable and or the pc serial.
If you enter the correct command the S35-HP will echo it and appear to Display.
Please upload the AT command manual for S25, and working with S35.
thank's
best regard
bsiswoyo
Uploaded file:**broken link removed**
[ This Message was edited by: bsiswoyo on 2002-04-26 04:06 ]