Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

LTCC allignment issue - handmade setup suggestion needed

Status
Not open for further replies.

mfarhan1

Advanced Member level 4
Joined
Apr 20, 2007
Messages
105
Helped
27
Reputation
54
Reaction score
13
Trophy points
1,298
Location
UK
Activity points
2,005
LTCC allignment issue

Hi all
I am facing problem in aligning different layers of green tape i dont have any automated system and the fiducials are not very reliable, any suggestion how to do it any proposed handmade setup would be appreciated.
Regards
Farhan
 

kspalla

Advanced Member level 4
Joined
Aug 19, 2008
Messages
1,256
Helped
257
Reputation
514
Reaction score
93
Trophy points
1,328
Location
Hyderabad, Andhra Pradesh, India
Activity points
6,812
LTCC allignment issue

Handmade setup is always problem.
For improvement, you can select the bigger panel, use of magnifiers, increase one more fiducial i.e two fiducials per corner and try to align.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top