Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Low Voltage - need help with the attached circuit

Status
Not open for further replies.
A

AlYanes

Newbie level 2
Joined
Mar 29, 2009
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,293
Low Voltage

I am new to this forum. I need help with the attached circuit. I am getting chattering on the relay due to a low voltage on A1. Can some one tell me why and how can I solve it?
 

Re: Low Voltage

Your drawing seems wrong. Also Pin 3 should not be connected to anything.
 

Re: Low Voltage

Thanks for your prompt response. I noticed that in your schematic it says IGT <= 15mA
The Triac I am using has an IGT <=35 mA
Will I have to change the resistors and capacitor values?
 

Re: Low Voltage

The diagram is from the application note. Try it with your triac and if you have more problems get a triac with Ig ≤ 15mA
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top