Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Looking for the cheapest method to commincate in 433MHz

Status
Not open for further replies.

xxtigerxx

Advanced Member level 1
Joined
Jun 5, 2001
Messages
441
Helped
38
Reputation
76
Reaction score
32
Trophy points
1,308
Location
Greece
Activity points
2,890
ad7020 chips

hello

I am looking for a transmiter and a receiver in 433Mhz with a
cheap way.

I do not need hi speed.

:)
 

microchip

i am also looking for them, created the thread:


and here is the store where i suggest you to buy it:

https://futurlec.com/Radio.shtml

it is very cheap online shop, i did buy things from them. and the delivery is just 5$
 

saw filter 433 cheap

I used one of there products and wasn't very pleased. It didn't to perform as well as expected.
 

tire pressure monitoring (tpm) system microchip

i am looking not only for modules but for ic like chipcon

does anyone use CC1100?
or does anyone use RFPIC12F275?

:p
 

vco bfr93

Search for a transceiver in this frequency, it should be easy to find. From what I know, hopeRF, wavecom and SIM are quiet cheap.
 

where to buy rfpic12f675f

xxtigerxx said:
i am looking not only for modules but for ic like chipcon

does anyone use CC1100?
or does anyone use RFPIC12F275?

:p

what is your problem with this PIC ?
can explain it
 

433mhz multichannel transmitter

Is this for mass production ?. If so I can help !. I designed a 433 MHz receiver for some 19 USD cent ! Transmitter is a little more 50 cnt USD.
 

transmitter bfr93

PaulHolland it is for mass production,

can you send me your designs?

:p

Added after 1 minutes:

haerifar

i do not have any problem with microchip but
i did not use it yet.

Have you use it
 

nrf401

Does anyone have a schematic with Rfpic12f675F with FSK modulation
 

433 mhz regenerativ receiver

cc1100 is a good choice. Also, accel semiconductor has AS6801 transceiver can work at 433MHz.
 

ad7020 datasheet

How much does the AS6801 cost and you have a datasheet ?.

For rfPIC16F675F look here:

AN238 - Tire Pressure Monitoring (TPM) System (microchip website)
**broken link removed**
 

cheapest transceiver 433 mhz

As a basic design decision, you should know if you need multi-channel capability. Then only synthesizer based transceivers, e. g. Chipcon are to choose from, rfPIC would be excluded. Said AS6801 has audio features, wouldn't expect it as a candidate for basic data communication, unless it has an extraordinary pleasant price.
 

Use super-regenerative method with an op huplse shaper at demodulation out.
 

Look here **broken link removed** for the RR4 Receiver module at $6.95 USD a transmitter is also listed for $5.95 but I can help you with a diagram and outlay using a BFR93 transistor and a 433 SAW filter, note the outlay is very important to limit harmonics, if I can help PM me and I will upload the goodies
 

Hi

Try Analog Device family
AD7020-1
Almost Everything on-chip!

David
 

y can do a vco as the transmitter,maybe this is the cheapest bu the performance is poor, or y can choose the NRF403 as the transceiver of the 433M
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top