Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Looking for reference on cmos output stage design

Status
Not open for further replies.

Ravi Karadi

Newbie level 6
Joined
Jan 21, 2005
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
78
cmos output stage

can anybody suggest some good ref on cmos o/p stage design
 

cmos output stage

Can you specify the purpose of your use? Maybe that is helpful for your question
 

Re: cmos output stage

on common . the ouput stage's drive ability is large or the output resistance is small if the load is small resistance or large capacitor

Added after 5 minutes:

You can see the book : cmos analog circuit design.
 

Re: cmos output stage

o/p stage design depends upon sourcing/sinking capability,resistive load and output swing.for detailed analysis refer to allen hollberg.
 

Re: cmos output stage

Output stage is one of the most important issues in opamp design and I didn't found any book that where good in them but reading dependent IEEE papers will help you so much better than any other book.
 

Re: cmos output stage

The W/L ratio should be large to increase drive ability and decrease output resistance.
 

Re: cmos output stage

u also should use multifinger technics in layouting or use some parallel mos's for output stage because better driving capabillity .......
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top