Looking for off the shelf 24v Frequency Divider

[veeru612]

Hi,
I am looking for an off the shelf frequency divider (need it divide by 2 only) that would take an input from a 24V DC and gives me equivalent 24V DC pulsed output with divided frequency
My real need is to get a pulse that triggers on alternate edges of another pulse with same voltage.

thank you,
-Veeru

 

[andre_luis]

You should search for "programmable pulse divider":

https://www.ifm.com/products/us/ds/E80100.htm

 

[veeru612]

You should search for "programmable pulse divider":

https://www.ifm.com/products/us/ds/E80100.htm

Wow, that was super quick. Thank you so much. I think I confused with my post. I am looking for a pulse multiplier - lets say I get an input signal of frequency 10 msec, I want an output signal of frequency 20 msec - dividing the frequency by 2. I am not sure if I am searching it correctly, I only could find this https://www.eidusa.com/Interface_Boards_Frequency_Pulse_Rate_Divider_1.htm and https://www.motrona.com/en/products...grammable-pulse-and-frequency-multiplier.html.

Thank you so much again.

- - - Updated - - -

My bad. It is not input signal of frequency(hz) but input signal of pulse width(msec) 10 msec.