Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Could you please explain more, what do you need exactly?
What kind of controller? DMX168 or DMX512.
What kind of LED module you need? Monochrome(or RGB) Led Bulb, Wall Washer LED Projector, Monchrome or RGB LED strip or anything else...
I would like to guide(help) you but more explanation is necessary.
this is the chip i need to find **broken link removed**
i'm building a ceiling of leds probably with luxeon bright leds, & dimming them with a dmx control board. i found a lot of led driver but it's very expensive (i need minimum 150 ch)
so with this chip, i could build my own for cheaper
i've got a lanbox... h**p://www.lanbox.com. i made a light computer with max h**p://www.cycling74.com
and i really need to control high power leds... this chip seems to be the best solution for me. do you have otehr solutions? i need a minimum of 350 output dimming pwm led
thanks.
philippe
DMX512 Decoder Module
1. Conform to DMX512/1990 international standard, ensuring the users to quickly develop and release DMX512-related products at the possible quickest time without in-depth knowledge of DMX512 protocol;
2. Available for 1-9 output channels with 256 grey scale for each channel;
3. Embedded signal output pin, available for connection with LED for indication of module state;
4. Automatic setup of DMX512 initial address, eliminating the problems faced in setting up DMX512 address by DIP switch;
5. Module design, facilitating embedment inside various LED Lamp.
Technical specifications:
Brand name： SC-DMX-00xH/L
Input voltage： DC 8 – 24V
Communication protocol： DMX512/1990
Nos. of output channels： 1 – 9
External dimension： 47(W)*32(D)*12(H)mm
Application： LED light, such as underwater light, buried light, floodlight, curtain wall light, clearance light, etc.
LED Full-Color Light Controller
1. Available for various operation modes, such as multiple interlocking synchronous control, asynchronous control, and DMX512 console control;
2. Synchronous mode: light data transmission through Ethernet (TCP/IP);
3. Asynchronous mode: data access through MMC interface (maximum support for 2G MMC card);
4. Available for arbitrary setup of play mode and speed;
5. Two groups of high-speed SPI serial signal output, with maximum 800 pixels for each group and with maximum 256 grey scale for each pixel
Technical specifications
Brand name： SC-SPI-2000
Power supply input： AC 100 – 240V，50/60HZ
Communication protocol： TCP/IP, SPI
Control points： 1600 full-color pixel points
Rated power： <5W
Operating temperature： -20~60℃
External dimension： 300(W)*200(D)*40(H)mm
Weight： 2kg
Application： LED light, such as buried light, floodlight, curtain wall light, clearance light, etc.
DMX512 Magic Light Controller
1．Available for two groups of international standard DMX512/1990 signal, control of 512*2=1024 light-regulating circuits 2*170=340 full-color RGB lamps), and 256 grey scale;
2． Support computer online and offline operation (effect files stored in MMC card);
3． Support data format generated by the control system software of our company;
4. Support connection of 100 sets of SC-DMX-2000 light controllers to form large light control system, available for control of 100*340=34000 full-color RGB lamps, greatly expanding the capacity of the control system
Technical specifications
Brand name： SC-DMX-2000
? Communication protocol： DMX512/1990 TCP/IP
? Network port： RJ45（10M）
? DMX512 output： RJ45×2
? synchronous signal output： RJ11×2
? power supply input： AC 100~240V，50/60Hz
Rated power： <5W
Operating temperature： -20~60 ℃
External dimension： 300(W)*200(D)*40(H)(mm)
Weight： 2.1kg
Application： Lighting for building landscape and commercial places with LED light source
DMX512 Controller
1. Output international standard DMX512/1990 signal, control 512 light-regulating circuits (170 full-color RGB lamps), 256 grey scale change;
2. Offline operation mode, reading scene files stored in MMC card;
3. Support data format generated by the control system software of own company;
4. Support DMX512 consol control
Technical specification
Brand name： SC-DMX-1000
? Communication protocol： DMX512/1990
? DMX512 output/u\input： RJ45×2
? Display： 16*4 large screen LCD
? Power supply input： DC 9V
Rated power： <2W
Operating temperature： -20~60℃?
External dimension： 130(W)*70(D)*40(H) mm
Weight： <1kg
Application： Indoor decoration: light for hotel, department store, square, restaurant, PUB 3D ads letters, signs and identifications, posters, light box
DMX512 Encoder Tester
1. Available for encoding, and for setup of the address for each DMX512 decoder module (SC-DNX-00xH/L) of own company;
2. Available for one-time setup of different addresses for the DMX512 control system consisted of by SC-DMX-00xH/L(DMX-512 decoder module) of own company;
3．Available for transmission single and multiple channel DMX512 signal;
4．Available for scene function, and for independent setup of DMX512 Start code and value of each channel;
5．Support transmission of DMX512 testing signal by 40Hz or 20Hz;
6．Available for receiving DMX512 signal and for separate display of 512 channels and their respective Start code
Product specifications
Brand name： SC-DMX-512
Communication protocol： DMX512/1990
? DMX512 I/O： RJ45×2
Display： 16*4 large screen LCD
? Power supply input： DC 9V
Rated power： <2W
Operating temperature： -20~60℃
External dimension： 130(W)*70(D)*40(H) mm
Weight： <1kg
Application： Applicable to equipment adopting DMX512 protocol for site commissioning by professionals, and to development inspection and system failure removal for computer light, DMX512 control consol and other DMX512 signal equipment
Introduction to LED Magic Light Control System Software
Introduction to LED MagicEditor
LED MagicEditor is LED effect editing software specially designed for LED lighting industry, which is available for setup of relevant parameters according to the actual project scale, and provides many embedded programmable effects. Through combination of various image elements and calling of system palette, the software can produce various vivid and brilliant changing scenes.
Features：
1. Various embedded programmable and visual combined design methods, ensuring easy animation making only by mouse click;
2. Quick insert of characters and images, strong color gradient function, many image transformation functions, special regional editing functions, ensuring more flexible in animation design;
3. Unique picture, text, AVI, and FLASH import function, ensuring easy effect editing by third-party software;
4. Easily generating offline file format required by control system, ensuring more flexible application in engineering
Introduction to LED MagicPlayer
LED MagicPlayer is a web player specially designed for our LED brilliant light controller, which realizes real-time playing of the project files edited by LED MagicEditor through Ethernet.
Features:：
1. Optional playing speed, maximum at 25 frames per second;
2. Available for time play, ensuring different project files are played at different time;
3. Automatic play (play according to the set parameters in the play list)
4. Ethernet-based transmission, facilitating user’s expansion and reducing investment cost for peripheral equipment;
5．Available for online control of 100 sets of SC-DMX-2000 brilliant light controllers
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
