Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Looking for an agent in Singapore or Malaysia

Status
Not open for further replies.

ipcore1981

Newbie level 5
Joined
Feb 13, 2005
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
70
Hi guys

I'm a Digital IC design engineer (6+ yrs of exp.) and looking for a job in Singapore or Malaysia.
As a foreigner who is not in that location, it is difficult to find a job remotely. Is there any consultant agency or agent to get my documents and help me to find a job? None of the recruiter companies that I found in web do this, they just get your CV and give it to employers, but don't do any effort to promote you.
Can anyone help me to reach to such a these agents?

Regards
 

Dear All,

We are pleased to inform you of the following vacancies in Microelectronics & Semiconductors division:

1. Position : Staff Engineer - Analog Mixed Signal Design

We are looking for individuals with extensive analog mixed signal circuit design experience in wireless communication area using standard CMOS technology. The person is expected to perform schematic and layout designs based on target silicon design kit to meet user requirements.

Responsibilities:

* Meet with customers, understand system requirement and propose architecture and circuit implementation
* Design, simulate and characterize circuits to meet system specifications and customer requirement
* Design test vehicles for tapeout and electrical characterization of circuits
* Work closely with device modeling, device and process engineers to optimize circuit performance
* Work closely with analog and mixed signal test engineers to characterize DC and functional performance of circuits.

Requirements:

* Recognised Bachelor Science Degree in Microelectronics or Electrical Engineering. Candidates with Master Science are preferred
* More than 5 years experience in mixed signal CMOS ASIC design
* Knowledge of wireless communication system and ASIC design, especially in system architecture, logic design and design for test


2. Position : Senior Engineer - Analog Mixed Signal Design

We are looking for individuals with extensive analog mixed signal circuit design experience in wireless communication area using standard CMOS technology. The person is expected to perform schematic and layout designs based on target silicon design kit to meet user requirements.

Responsibilities:

* Meet with customers or end-users, understand system requirement and propose architecture and circuit implementation
* Develop sub-circuits and circuits to meet system specifications and customer requirement
* Design test vehicles for tapeout and electrical characterization of circuits. Work closely with device modeling, device and process engineers to optimize circuit performance
* Work closely with analog and mixed signal test engineers to characterize DC and functional performance of circuits.

Requirements:

* Recognised Bachelor Science Degree in Microelectronics or Electrical Engineering. Candidates with Master Science are preferred
* More than 3 years experience in analog mixed signal CMOS IC design
* Knowledge of wireless communication system and circuits, especially in circuit design of analog front-end


3. Position : Staff Engineer - ASIC Design

We are looking for individuals with extensive ASIC design experience using standard CMOS technology. The person is expected to have designed, implemented, verified and tape out mixed signal devices for wireless communications using industry CAD tools.

Responsibilities:

* Meet with customers or end-users, understand system requirement and propose architecture and block specifications for design implementation
* Develop hardware design of system and blocks to meet end-user requirements
* Work closely with ASIC library design engineers for proper use of standard cells, analog mixed signal macros and memory compilers
* Sign off mixed signal ASIC design for tapeout and silicon functional test
* Work closely with test engineers to characterize functional performance of mixed signal ASIC system and blocks

Requirements:

* Recognised Bachelor Science Degree in Microelectronics or Electrical Engineering. Candidates with Master Science in Microelectronics are preferred
* More than 5 years experience in mixed signal CMOS ASIC design
* Knowledge of wireless communication system and ASIC design, especially in system architecture, logic design and design for test.


4. Position : Staff Engineer - Process Integration

We are looking for individuals with extensive wafer fab experience in process integration of CMOS technology. The person is expected to formulate strategies for development of device and process modules, and capable of designing test vehicles to characterize technology parameters.

Responsibilities:

* Develop process specifications based on specific design rules and technology requirements
* Formulate engineering strategies for device and process module development
* Design test structures (vehicles) for electrical characterization of modules, modeling and functional yield
* Work closely with process engineers to develop modules and improve yield
* Work closely with device modeling engineers to extract model parameters for circuit simulation.

Requirements:

* Recognised Bachelor Science Degree in Microelectronics, Electrical Engineering or Physics. Candidates with Master Science in Microelectronics are preferred
* More than 5 years experience in semiconductor fabrication process and process integration
* Profound knowledge of semiconductor electrical characterization and tests.


5. Position : Senior Engineer - Process Integration

We are looking for individuals with experience in process integration of CMOS technology. The person is expected to develop device and process modules and perform characterization of technology parameters.

Responsibilities:

* Develop process specifications based on specific design rules and technology requirements
* Perform process and device simulations to facilitate process recipe creation and process integration
* Create short loops for developments of device and process modules
* Design test structures for electrical characterization of modules
* Work closely with process engineers to develop modules and improve yield
* Work closely with device modeling engineers to extract model parameters for circuit simulation.

Requirements:

* Recognised Bachelop Science Degree in Microelectronics, Electrical Engineering or Physics. Candidates with Master Science in Microelectronics are preferred
* More than 3 years experience in semiconductor fabrication process and process integration
* Knowledge of semiconductor electrical characterization and tests.


Interested MIMOSian are advised to apply via your immediate superior and submit your application to Human Capital & Competency Development (HCCD) MIMOS.

Please also assist us by communicating the above vacancies to your friends and acquaintance.

For mailing purpose, please send your application to:

Human Capital & Competency Development
MIMOS Berhad
Technology Park Malaysia
57000 Kuala Lumpur

or email to recruit@mimos.my

Closing Date: 27 May 2005 (Friday)

Regards,
Haliza Ramli
Recruitment Manager
Human Capital & Competency Development
 

Hi..

My friend in Myanmar is looking for a job in engineering field... she is graduated from Myanmar Univesity in Science (Specialized in Physics) and Diploma Electrical Electronic and Communication Engineering... Is there any job suitable for her..
Please reply me..

Thanks and regards..
Nyein Nyein
 

Hi..

My friend in Myanmar is looking for a job in engineering field... she is graduated from Myanmar Univesity in Science (Specialized in Physics) and Diploma Electrical Electronic and Communication Engineering... Is there any job suitable for her..
Please reply me..

Thanks and regards..
Nyein Nyein
 

Hi..

My friend in Myanmar is looking for a job in engineering field... she is graduated from Myanmar Univesity in Science (Specialized in Physics) and Diploma Electrical Electronic and Communication Engineering... Is there any job suitable for her..
Please reply me..

Thanks and regards..
Nyein Nyein
 

Attn: Recruiting Manager,

PCBinida.com is an eMarket for Electronics Manufacturing Industry.

Whether you are looking for a Job in Electronics or want to recruit an employee Pls. visit www.PCBindia.com for information and **broken link removed** to register your Position/ search for current Positions.

For further details, pls. contact:


Customer Support
PCBindia.com
eMarket for Electronics Manufacturing!
Address: J12, Natasha Park # 1, New Chhani Road, Vadodara 390002 INDIA
eMail: mail@pcbindia.com; Web: www.PCBindia.com
Cell: +91 94273 42041; Tel: (265) 5581371
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top