Hi,
can someone tell me how to do load regulation setup for the BGR simulation. Should I use a resistive type of load, If yes how much should be the resistor value.
Yes, use R load to test load regulation of bandgap. Just the same way as regulator load regulation test.
The value of R load depends on the current available for sinking/sourcing without affecting the accuracy of the output voltage.
Hi,
BGR' are usually not designed to sink or source current.
But if you source or sink current into a BGr how does the reference voltage change.
A DC characteristic.
Yes, use R load to test load regulation of bandgap. Just the same way as regulator load regulation test.
The value of R load depends on the current available for sinking/sourcing without affecting the accuracy of the output voltage.
Hi paulux,
thanx for the reply..But i didnt get the concept of BGR sourcing/sinking current. Can u provide me some material or links regarding this. can u upload the ckt of how to do this load regulation for BGR.