Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Large LED CLOCK display

Status
Not open for further replies.

pasicr

Advanced Member level 1
Joined
Aug 13, 2005
Messages
440
Helped
39
Reputation
80
Reaction score
29
Trophy points
1,308
Location
Macedonia
Activity points
4,213
large led clock

Hi,
I need info or link for made 24 cm high led clock display, with time, date and temperature show,
something like led display used on gas station, for example,
regards
 

large led arabic clock

I think this is part from what you want (clock).
Please find attached
 

huge led display topics

Hi Baron,
thanks for info, but I need good working projects for clock and temperature show like this:

regards
 

large led clock displays

Pasicr in the attached temperature measuring circuit .I don't know if it help .
Best Regards
 

large ledclock

Hi for all,
can somebody suggest me how can I connect (between) this led's 5 mm red diode's (picture show diode arrangement for one segment in 7 segment display),

If someone have a experience with led constant current driver, divide with me,
regards
 

You don't need constant current, just use the same number of LEDs per segment.
You've got 26 LEDs so you'll need 2x13 rows (or carefully do the math for different combinations)
So 1.8V * 13 = 23V per set + 0.7V drops if you use bipolar drivers + some overhead for the resistor, lets say 2.3V so 26V supply will need a 150ohm resistor (this will give each LED about 15ma so nice and bright)
 

    pasicr

    Points: 2
    Helpful Answer Positive Rating
250 and 500mm Large LED dispay:

**broken link removed**
 

<<<>>><<<>>><<<>>><<<>>><<<>>><<<>>><<<>>>

Now I add all my hobby project about clock for your help


================ENJOY THIS==================


<<<>>><<<>>><<<>>><<<>>><<<>>><<<>>><<<>>>
 

That MAX7219 is a very nice but not cheap part, also may be hard to source for some.
It's SPI or (Microwire MAX7221) and does most of the work for you.
It's only for simple LED display (less than 3V LEDs) and cannot drive a large HV LED display.**broken link removed**
**broken link removed**
 

soory, can u help me making scoringboard?

I don't have an idea, I'm a newbie
 

Thanks a lot guys i needed one of these.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top