Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

lake of the sdf caculator

Status
Not open for further replies.

Nobody

Full Member level 3
Joined
Oct 4, 2001
Messages
165
Helped
9
Reputation
16
Reaction score
7
Trophy points
1,298
Location
Formosa
Activity points
1,593
When the Cadence IC5.0 linux is out.
Now almost the EDA tools are ready in linux from front-end to back-end .
But after extract RC by xcalibre , what tool do u have to make the sdf for back annotate to primetime and nc-sim ?
And is it avaiable in linux ?
 

chyau

Member level 5
Joined
Dec 4, 2002
Messages
87
Helped
6
Reputation
12
Reaction score
4
Trophy points
1,288
Location
Taiwan
Activity points
547
Hi,

Nautilus DC(celestry company)software can do it.
It can run on solaris/linux platform.

Best Regards,
chyau
 

ccljpeg

Junior Member level 3
Joined
Dec 8, 2001
Messages
26
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
138
you can load netlist , and use "set_load" command with extracted cap

load file to $y$nop$y$ tool, and get ths sdf file
 

Nobody

Full Member level 3
Joined
Oct 4, 2001
Messages
165
Helped
9
Reputation
16
Reaction score
7
Trophy points
1,298
Location
Formosa
Activity points
1,593
Celestry is available in fskao's ftp . The synopsys DC/Primetime although can output the sdf . It's slow and not recomend .
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top