Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

lake of the sdf caculator

Status
Not open for further replies.
N

Nobody

Full Member level 3
Joined
Oct 4, 2001
Messages
164
Helped
9
Reputation
16
Reaction score
7
Trophy points
1,298
Location
Formosa
Activity points
1,593
When the Cadence IC5.0 linux is out.
Now almost the EDA tools are ready in linux from front-end to back-end .
But after extract RC by xcalibre , what tool do u have to make the sdf for back annotate to primetime and nc-sim ?
And is it avaiable in linux ?
 

Hi,

Nautilus DC(celestry company)software can do it.
It can run on solaris/linux platform.

Best Regards,
chyau
 

you can load netlist , and use "set_load" command with extracted cap

load file to $y$nop$y$ tool, and get ths sdf file
 

Celestry is available in fskao's ftp . The synopsys DC/Primetime although can output the sdf . It's slow and not recomend .
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top