I am designing a singel ended comparator. according to design and specs, i need to generate a referencevoltage by using simple resistor. now, i m facing the problem that my refence is not consatant. it is varing with respect to input. the variation in the refe is 5%of another input singal amplitude. can any have any suggetion to remove that ref variation?
It isn't clearly undestable though ur question what is the reference u've utilized and what circuitry u've used for comparator.
In generally this solves by increasing current though resistor and by adding filter capacitor.
Good reference about kickback noise:
Don't forget push "helped me" button if my help is quite appropriate.
the kick back means that the comparator makes noise on it is input signal so if you have meany comparators connected on the same input you will have a problem
whenever you turn off a MOS it release charges that were used to form the channel and this leads to flow of current which is not supposed to be there.... this leads to voltage spike and this effect is called kickback effect...