Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Jtag support:usb to parallel converter

Status
Not open for further replies.
ivar

ivar

Junior Member level 1
Joined
Jun 29, 2008
Messages
18
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,418
parallel to usb jtag -xilinx

Has anybody used the usb to parallel port converters (around $10, Make: Bafo, Belkin etc) for JTAG programming? When i searched on the net, i found that these devices install a virtual usb printer driver (in windows) and provide only printer functionality, i,e they cannot be used for programming ,interfacing etc. as can be done in a real parallel port.
 

support support usb to parallel

The topic has been discussed before, with a clear result (confirming your observation). With a notebook, you may want to use a PC-Card (PCMCIA) real hardware LPT interface for ~$30.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top