Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

jdm programmer and pic18f452

Status
Not open for further replies.
S

seyyah

Advanced Member level 2
Joined
Oct 7, 2001
Messages
646
Helped
8
Reputation
16
Reaction score
8
Trophy points
1,298
Activity points
6,233
kitrus pic18f452

can jdm programmer program this chip or 18 series?
 

jdm+18f452

> can jdm programmer program this chip or 18 series?

Nops, but the Propip2 is a very simple programmer that can do that.
**broken link removed**
I use a compact Propic2, eschematics attached.
 

seyyah said:
can jdm programmer program this chip or 18 series?
Click to expand...

i think the best programmer in free line up is from kitrus and its program
a wide range of pic micro with out any prob also 18 series of pic micro
also check you pm you will find some thing interusting
 

seyyah said:
can jdm programmer program this chip or 18 series?
Click to expand...

Hi,
Yes it can. I have programmmed some before two three days. Have in mind that ICPROG 1.05 has a bug and doesnt write correclty the fuses to 18F452. A patch is out there to rectify this (only for 18F452).
I attach this also here (To work you need to rename your ICPROG executable as "icprog v1.5c.exe").

B.R.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top