Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Issue in reading the PSU FW information through PMBus

Status
Not open for further replies.

yan.ding

Newbie level 3
Joined
Oct 6, 2008
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,305
Reading the PSU's F/W information through the PMBus, and the returned information is n/a. After changing the pull-up resisitor from 2K to 2.7K on the BMC_PSU_CLK, this problem was solved. Wonder why please :)
 

KlausST

Super Moderator
Staff member
Joined
Apr 17, 2014
Messages
22,994
Helped
4,714
Reputation
9,444
Reaction score
5,079
Trophy points
1,393
Activity points
152,351
Hi,

Use a scope and compare the signals. (Levels, timing, ringing..)

Klaus
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top