Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Issue in inductor modeling

Status
Not open for further replies.
N

Nonsense

Junior Member level 2
Joined
Dec 7, 2004
Messages
24
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
243
Hey, guys,

I'm modeling inductors by fitting quality factor and inductance, and the fittings are pretty good now. However, I found that although Y parameters (my Q and L are extracted from Y parameters) fit well, the S parameter fittings are nasty (dB(S11) differs about 8dB). This really confuses me, which one should I use to fit my inductor??

Thank you.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top