Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

isolation cell and level shifter

Status
Not open for further replies.
S

sun_ray

Advanced Member level 3
Advanced Member level 3
Joined
Oct 3, 2011
Messages
772
Helped
5
Reputation
10
Reaction score
5
Trophy points
1,298
Visit site
Activity points
6,828
There is a voltage domain D1 inside which there is a power domain P1. There is a voltage domain D2 inside which there is a power domain P2.

What are the cells necessary for a signal going from D1/P1 to D2/P2? Isolation cell and level shifter are necessary. Will there be necessity of any other cells?

What will be the position sequence of the isolation cell and level shifter? Will the level shifter be positioned first or the isolation cell?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top