Aug 30, 2012 #1 S Shivanand P Junior Member level 1 Joined Aug 29, 2011 Messages 16 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,281 Activity points 1,412 I mean to say that, I wanted to use transmission with 3.3V and my reception is with 5V can i use a 3.3v transmission for that receiver using MAX232?
I mean to say that, I wanted to use transmission with 3.3V and my reception is with 5V can i use a 3.3v transmission for that receiver using MAX232?
Aug 30, 2012 #2 alexan_e Administrator Joined Mar 16, 2008 Messages 11,888 Helped 2,021 Reputation 4,158 Reaction score 2,031 Trophy points 1,393 Location Greece Activity points 64,371 When MAX232 is connected to 5v supply then VIL Low-level input voltage (T1IN, T2IN) 0.8v VIH High-level input voltage (T1IN,T2IN) 2v so it will work fine, you can send 3.3v signals and receive 5v signals (I assume your mcu is 5v tolerant)
When MAX232 is connected to 5v supply then VIL Low-level input voltage (T1IN, T2IN) 0.8v VIH High-level input voltage (T1IN,T2IN) 2v so it will work fine, you can send 3.3v signals and receive 5v signals (I assume your mcu is 5v tolerant)
Aug 30, 2012 #3 not-a-moderator Full Member level 3 Joined Sep 5, 2011 Messages 163 Helped 46 Reputation 92 Reaction score 43 Trophy points 1,318 Location South Africa Activity points 2,263 You can also have a look at this doc that explains the TTL/CMOS thresholds: **broken link removed**
Aug 30, 2012 #4 S Shivanand P Junior Member level 1 Joined Aug 29, 2011 Messages 16 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,281 Activity points 1,412 Thanks for your valuable reply..