Hi
As I don't familiar with the antenna design.
I would like to design an antenna for both 2.4G and 5.8G.
Any suggestion? or Any books or reference that i can read before simulation?
Many Thx.
Re: Is it possible to design an antenna for both 2.4G and 5.
Hi iamchrisk,
it is possible. A simple example will be a patch antenna (designed to operate at 2.4GHz and to obtain a 5.8 GHz operation cut an appropriate slot in the patch.
Element7k
iamchrisk said:
Hi
As I don't familiar with the antenna design.
I would like to design an antenna for both 2.4G and 5.8G.
Any suggestion? or Any books or reference that i can read before simulation?
Many Thx.
Re: Is it possible to design an antenna for both 2.4G and 5.
of course ,a LPA can do it easily,you can try
iamchrisk said:
Hi
As I don't familiar with the antenna design.
I would like to design an antenna for both 2.4G and 5.8G.
Any suggestion? or Any books or reference that i can read before simulation?
Many Thx.
some of the books which might help you are "Antenna and EM Modeling with Matlab by Sergey N. Makarov" and "Antenna Theory: Analysis and Design, 3rd Edition by Constantine A. Balanis",..these will give you a very good perspective in RF component design and its implementation.
Re: Is it possible to design an antenna for both 2.4G and 5.
what if we want a reconfigurable antenna instead of dual band
that is antenna should be resonant at both freqs one at a time.
maybe by using a switch?
does anyone have any design guide for reconfigurable antenna
ie its dimensions, specs?
I like to have it in microstrip technology.
Thanks