I am having trouble getting MMC initialised using mmc_fat_init() function. Initialisation fails due to an unknown reason.
I tried simulating it in Proteus and used LEDs to check if MMC is getting initialised. I am attaching the program config settings and ISIS file.
Actually I have edited the library example to include LEDs for debugging, and removed UART commands.
My logic is that LEDs D3, D4 turns off if MMC is initialised successfully otherwise D1 goes off
All suggestions are welcome.
Thanks in advance
Regards,
If you use that circuit for simulation it will work. What error are you getting. Post the error message. How did you create mmc image file? Post your mmc image file so that we can simulate.