Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Interfacing PIC32 to FPGA using LVTLL pins

Status
Not open for further replies.
BlackOps

BlackOps

Full Member level 5
Joined
Jan 1, 2005
Messages
279
Helped
14
Reputation
28
Reaction score
3
Trophy points
1,298
Location
AZERBAIJAN
Activity points
2,496
Hello, im going to interface PIC32 to FPGA board which has some connecters which lead to its LVTTL pins...

as i saw LVTTL accepts up to 3.5volts right?

so i guess that wont be a problem to drive 3.3v signal as an input to FPGA with LVTTL pins?
 

PIC32 to FPGA

LVTTL is a 3.3V I/O standard. It exactly matches PIC32 I/O voltage level.
 

    BlackOps

    BlackOps

    Points: 2
    Helpful Answer Positive Rating
PIC32 to FPGA

Thank you FvM! (but before PIC32 im going to drive signals from other pics, but i am going to supply not more than 3.3volts to them for that reason)

and the board is XUPV2P
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top