Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Interfacing of GSM module via UART

Status
Not open for further replies.
S

shaikss

Full Member level 4
Full Member level 4
Joined
Jun 18, 2007
Messages
229
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,298
Visit site
Activity points
3,319
HI,

I am working on a Saline fluid monitoring application - where the IVF injected into the patient's body is monitored by the care-taker remotely. If there is no fluid passage into the body, the nurse should get SMS as an alert.

I have used TI'S CC2530 Zigbee kit wherein the LED on the KIT glows when there is no passage of fluid. It has SPI and UART interface. So, I need to interface the same with GSM to send SMS. Let me know how to interface GSM via UART with the CC2530 kit.

Thanks!!!!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top