Texton
Newbie level 4
Hi guys.
I have to design a interfaceboard for my microcontroller (PSoC5 - 3.3V). The interface board should have +/- 10V in/out and a minimum bandwidth at 48kHz.
My plan for the output right now is to control mosfets with the microcontroller which opens and closes for the 10V.
But before I begin to build and test anything, I wanted to see if you guys had some suggestions/tips on how to interface the microcontroller with other voltagelevels, both in and out?
I have to design a interfaceboard for my microcontroller (PSoC5 - 3.3V). The interface board should have +/- 10V in/out and a minimum bandwidth at 48kHz.
My plan for the output right now is to control mosfets with the microcontroller which opens and closes for the 10V.
But before I begin to build and test anything, I wanted to see if you guys had some suggestions/tips on how to interface the microcontroller with other voltagelevels, both in and out?