shingadaddy
Junior Member level 2
how to interface micro controller and bluetooth
Yep. Thats a good one. Lots of companies make them. Also note that one of the suggested applications for this module is "USB DONGLE". If it were placed in a DONGLE, that would be one of the "INTELLIGENT" or "DRIVERLESS" dongles if this module was used. However "DRIVERLESS" is a bit of a misnomer since a virtual com port driver is usually invoked because the onboard radio electrronics usual fake the PC into thinking there is a USB to RS232 com port hooked into the usb port on the PC. We like the idea of the RADIO parts being easily/quickly removable for secuity reasons. Hence my desire to use a dongle. Blueroomelectronics makes some good suggestion regarding your project and the device you have found should be good. Somewhere on the site that this module comes from will probably have a list of commands for controlling it via UART. Good luck with your project.
Yep. Thats a good one. Lots of companies make them. Also note that one of the suggested applications for this module is "USB DONGLE". If it were placed in a DONGLE, that would be one of the "INTELLIGENT" or "DRIVERLESS" dongles if this module was used. However "DRIVERLESS" is a bit of a misnomer since a virtual com port driver is usually invoked because the onboard radio electrronics usual fake the PC into thinking there is a USB to RS232 com port hooked into the usb port on the PC. We like the idea of the RADIO parts being easily/quickly removable for secuity reasons. Hence my desire to use a dongle. Blueroomelectronics makes some good suggestion regarding your project and the device you have found should be good. Somewhere on the site that this module comes from will probably have a list of commands for controlling it via UART. Good luck with your project.