Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Interconnection by square waveguide

Status
Not open for further replies.
M

markito86

Newbie level 6
Newbie level 6
Joined
Mar 23, 2011
Messages
14
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,375
Hi all,

I have two fixed square waveguides with slightly different cross section, and they are shifted along x and y axis.
I have to design (in HFSS) a waveguide interconnection that allow this connection and implement the x-y shift.
I have just tried to use mitered and continuous bands (with a single step for the cross section) but the Return Loss is too low.
Could you help me.
Valuable suggestions and help would be much better and appreciable.

Marco
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top