INTEL DG31GL motherboard no display.

[gyanuloving]

I have same problem . no display in INTEL DG31GL BOARD. so please tell me what i do.
i check voltage at dimm ram slot .
pin 1 - .9V (ddr2 ram)
and vcc volt at pin - 67 1.8V
and data and clk at pin no. 119 and 120 - 3.5V

post card show code 0000 with high rst

 

[udayan92]

I have same problem . no display in INTEL DG31GL BOARD. so please tell me what i do.
i check voltage at dimm ram slot .

Can you give some more details on what exactly is happening?

 

[gyanuloving]

When I power on then no dispaly on board while ram and ram volt ok. and cpu proper heat.
post card (diagnostic or debug card) show 0000 with high rst.

 

[udayan92]

Have you checked whether graphics driver has been installed on the motherboard?

 

[gyanuloving]

Have you checked whether graphics driver has been installed on the motherboard?

graphic driver may be effected when some display or bios screen appear. but here nothing on screen.

 

[burt007]

change power supply and see what happenes.

graphic driver may be effected when some display or bios screen appear. but here nothing on screen.

 

[gyanuloving]

change power supply and see what happenes.

I am already check spms . this is ok .

 

[peter_england]

check GMCH ICH input power check vrm is good vrm power good signal