Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Integrating ADC Conversion

Status
Not open for further replies.

laiza

Advanced Member level 4
Joined
Oct 24, 2005
Messages
115
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,296
Location
Asia
Activity points
1,995
Are there any better ADC aside from Intergrating ADC? Please advise
 

hi
you mean to say internal microcntroller adc vs externally connected ADC? internal ADC of MCU has limited resolution.if you have high resolution requirment go with external.bt need extra microcontroller pins for interfacing (since external adc need some communication media i.e i/o,spi etc). Its totally depend on your requirment
 

Please ask a clear question. Do you mean ADC based on integrator and interval counting like dual-slope ADC?

If so, it has performance limitations due to capacitor non-ideality and can't compete with sigma-delta ADC for highest linearity requirements.
 

There is no "better" or "best" ADC topology, each offers different strengths and weaknesses that one must consider against the intended application and required performance.

On the Analog Devices website there is an app note which compares the different ADC architectures.
 
  • Like
Reactions: laiza

    laiza

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top