Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Information required about pic16f877a programmer

Status
Not open for further replies.
A

aadeelkhan

Newbie level 1
Joined
Oct 10, 2008
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,289
about pic16f877a

Hi,
My question is about programming pic16f877a microcontroller.
Please tell me that normally on serial port transmit(Tx) and Receive(Rx) pins are
used to send or receive program to and from controller but in all programmer
schematics i observed that DTR,CTS, RTS pins are used while programming the
controller and Tx pin is used to provide programming voltage
y not TX or RX pins are used to send or receive program like in atmel controllers.


Thanx in advance.

Awaiting for reply........
 

what is the programmer used to program pic16f877a

you may use a MAX232 for your design, we also used this method to interface our pc to our PIC16f877a... u can code it using mikroC
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top