Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Infineon C167 CAN Bus 'C' source code wanted

Status
Not open for further replies.

_Nick

Newbie level 6
Joined
Aug 7, 2001
Messages
14
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
30
infineon c167

Does anyone have 'C' code for initialising the CAN Bus controller within the C167 Microcontroller.

I have the Tasking compiler for the C167 / ST10

I have try some code but it dosen't work.
The Programm should only send one message and receive the message with the second CAN Interface in the C167 CS.

Can anyone help me

Thanks in advanced

Nick
 

c167 can

_Nick,

take a closer look at the Infineons website; you'll find some examples in the application notes section as well DAvE, which allows you to generate code according to your project requirements. Anyway, you can use DAvE to "generate" the init function :D
You might find further useful information on the Ke*| website as well...
Hope it helped,
Maddin
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top