Impedence Matchin using SMITH CHART

[rafa040]

Kindly design a matching Network For Matching Z=50 ohm to Z=112.21- j*78.21 Using SMITH chart..
Thanks in advance..

 

[bannay]

Have a look at the following website. h**p://www.amanogawa.com/archive/transmissionB.html

 

[rafa040]

sorry sir , but its not opening if u have som alternate for it i wil be greatful...

 

[G4BCH]

The link works fine just copy from www to the end and paste it into your browser. It is a good teaching tool.

 

[Element_115]

Kindly design a matching Network For Matching Z=50 ohm to Z=112.21- j*78.21 Using SMITH chart..
Thanks in advance..

Here is a good tool to use.

www.bessernet.com/jobAids/jSmith/jSmith.html

Here's

 

[RCinFLA]

Kindly design a matching Network For Matching Z=50 ohm to Z=112.21- j*78.21 Using SMITH chart..
Thanks in advance..

Cannot do without knowing frequency.

 

[G4BCH]

Assuming single frequency you do not need frequency to design the network, only to determine the actual values of inductor, capacitor or line length needed.

 

[jerry1978]

Use the RF Office (download from https://www.wave-dimension.com).