hartejpal
Junior Member level 2
Hi All,
I need to implement an image processing algorithm on an Altera Cyclone IV Transreceiver Development Board.
The broad plan is to transfer a bit map from PC to the board through the PCIe interface and onto the RAM on the board,
the image gets processed on the board and is returned to the PC after processing again as a bit map.
Need help on two issues:-
1. I am stuck at the first step to transfer the image to the board.
2. Also not getting any of my simple programs in Verilog to be stored on the flash memory on the board so that on power recycle the board configures itself from the flash. It is important since I have to have the program loaded before PCIe on the PC detects the board.
Please indicate me to the right direction, any help will be deeply appreciated.
Thanx in anticipation
I need to implement an image processing algorithm on an Altera Cyclone IV Transreceiver Development Board.
The broad plan is to transfer a bit map from PC to the board through the PCIe interface and onto the RAM on the board,
the image gets processed on the board and is returned to the PC after processing again as a bit map.
Need help on two issues:-
1. I am stuck at the first step to transfer the image to the board.
2. Also not getting any of my simple programs in Verilog to be stored on the flash memory on the board so that on power recycle the board configures itself from the flash. It is important since I have to have the program loaded before PCIe on the PC detects the board.
Please indicate me to the right direction, any help will be deeply appreciated.
Thanx in anticipation