lifeislife
Newbie level 4
I need help for a project requirement using Cadence Virtuoso as per below:
• Use the 5G standard.
• Pick one subject:
–Low-Noise Amplifiers
–Mixers
–Oscillators
–Power Amplifiers
•The circuit must use MOSFETs (no BJTs).
The 45-nm process employed.
•The bias level for the circuit should be between 0 V and 1 V.
Which topic is the easiest to design for beginners, any assistance available/guidelines/ papers or other ?
Thank you.
• Use the 5G standard.
• Pick one subject:
–Low-Noise Amplifiers
–Mixers
–Oscillators
–Power Amplifiers
•The circuit must use MOSFETs (no BJTs).
The 45-nm process employed.
•The bias level for the circuit should be between 0 V and 1 V.
Which topic is the easiest to design for beginners, any assistance available/guidelines/ papers or other ?
Thank you.