Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] I2c Arbitration lose

Status
Not open for further replies.

Mukesh10

Junior Member level 2
Junior Member level 2
Joined
Jun 22, 2012
Messages
24
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Location
Bangalore
Visit site
Activity points
1,432
Hello Everyone.

i am working on verification of I2c. i have a question on arbitration in i2c. whenever there is arbitration lose in i2c an interupt is send to cpu. CPu will check the interrupt weather it is for Arbitration lose of data read/write complition. what will CPU do if the interupt is because of Arbitration lose. it will terminate the data read/write or it will continue the transfer.
 

The cpu should wait the I2C is free before retry to initiate a frame.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top