Überkommander
Newbie
Yesterday i built something like a giant spdt switch with an 330uF condensator and 12v relay, it also has an 12v pover input. The switch has 3 positions down, middle, and up. When i move the switch to the down or up position, it should send an impulse to my keyboard card which should emulate the G key on the keyboard.
Now wanna add 6ledsto the circuit 3red and 3green. When i move the switch to the down position, then red leds should lit up for 12 seconds and then should green leds stay lit until i move the lever to the up position. When i move it to up position, then the green leds should turn off and the red leds should lit up for 12 seconds.
Now wanna add 6ledsto the circuit 3red and 3green. When i move the switch to the down position, then red leds should lit up for 12 seconds and then should green leds stay lit until i move the lever to the up position. When i move it to up position, then the green leds should turn off and the red leds should lit up for 12 seconds.