Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Were you asked this as an interview Q or what is it that you want to do?
Look at this thread: https://www.edaboard.com/threads/341476/.
Here the OP, sam93, in #6 says he doesn't want to use a clock divider and then in #17 he says that he wants to achieve this by clock division and using a counter. A classic example of misleading people (perhaps the OP didn't understand what he had at his disposal and what he wanted to achieve) who want to help!
Well you may build a model which has 10x 'divide-by-10 counter', but as mentioned above, this is not best-practice and is not the cheapest way.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.