May 25, 2007 #1 G Giuss Member level 1 Joined Oct 16, 2006 Messages 38 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,286 Activity points 1,446 Hi, in my circuit the PIC processor communicates with the PC in ASCII using Hyperterminal I want to know if there is a command that the PIC can send to the PC to clear the entire screen in Hyperterminal Bye and thanks
Hi, in my circuit the PIC processor communicates with the PC in ASCII using Hyperterminal I want to know if there is a command that the PIC can send to the PC to clear the entire screen in Hyperterminal Bye and thanks
May 25, 2007 #2 artem Advanced Member level 4 Joined May 22, 2003 Messages 1,347 Helped 126 Reputation 252 Reaction score 32 Trophy points 1,328 Location Turkey Activity points 13,451 you can set your hyperterminal to emulate vt100 and there is vt100 guide where escape sequences are presented : https://vt100.net/docs/vt100-ug/
you can set your hyperterminal to emulate vt100 and there is vt100 guide where escape sequences are presented : https://vt100.net/docs/vt100-ug/
May 29, 2007 #3 J Jonathan_T Member level 1 Joined Mar 28, 2007 Messages 33 Helped 1 Reputation 2 Reaction score 0 Trophy points 1,286 Activity points 1,447 could you study in command line programming thus as link below **broken link removed** or **broken link removed**
could you study in command line programming thus as link below **broken link removed** or **broken link removed**
May 30, 2007 #4 nomad13 Full Member level 3 Joined Jan 29, 2007 Messages 150 Helped 18 Reputation 36 Reaction score 6 Trophy points 1,298 Activity points 2,196 My suggestion to you is to make your own hyperterminal program that clears the screen if it recieves a command from the pic.
My suggestion to you is to make your own hyperterminal program that clears the screen if it recieves a command from the pic.
May 30, 2007 #5 G Giuss Member level 1 Joined Oct 16, 2006 Messages 38 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,286 Activity points 1,446 Thank you