Hyperterminal and PIC processor

[Giuss]

Hi, in my circuit the PIC processor communicates with the PC in ASCII using Hyperterminal

I want to know if there is a command that the PIC can send to the PC to clear the entire screen in Hyperterminal

Bye and thanks

 

[artem]

you can set your hyperterminal to emulate vt100 and there is vt100 guide where escape sequences are presented :
https://vt100.net/docs/vt100-ug/

 

[Jonathan_T]

could you study in command line programming thus as link below

**broken link removed**

or

**broken link removed**

 

[nomad13]

My suggestion to you is to make your own hyperterminal program that clears the screen if it recieves a command from the pic.

 

[Giuss]

Thank you