Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

HVPP/HVSP/ISP programmer for Atmel AVR processors

Status
Not open for further replies.

Vermes

Advanced Member level 4
Advanced Member level 4
Joined
Aug 2, 2011
Messages
1,163
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,316
Activity points
22,318


A lot of programmers for AVR processors can be found on the Internet, but they mostly operate in low-voltage programming mode (ISP). It is really difficult to find a programmer which operates on HVPP/HVSP.

This project was inspired by „fusebit doctor” **broken link removed**. Spider was based on the fusebit doctor's schematic and looked like that:




You can also create similar device with more advanced technology with use of universal boards adn kynar. Atmega8515L is the main element of this version of project. This version is presented in the following pictures:



There is ISP header on the board, but there was no space left for buffer (74HC125) and it was placed on a smaller board, soldered to the bigger one.

The programmer's schematic consists of fusebit doctor's electronics with another processor clocked by resonator 7,3728MHz and added ISP (buffer from USBasp-yuki programmer: LINK.

Connector for additional modules with bases is compatible with the FD.

There are some drawings which are enough to create that system:



Firmware for AT8515L was made in C (compiled using GCC).

Link to original thread (useful attachment) - Programator HVPP/HVSP/ISP dla procesorów Atmel AVR
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top