Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HSPICE Transient Noise

Status
Not open for further replies.
M

MagnetsGT

Newbie level 3
Newbie level 3
Joined
Nov 10, 2013
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
21
Hey Guys,

I have a bit of a problem with my SPICE transient simulations. Essentially I have circuit with a few non-linear current/voltage sources, resistors and capacitors. I have thus far been using NGSPICE for my simulations but they do take a significant amount of time to complete and there are a couple slight errors which I believe are caused by convergence problems. Thus I want to try my simulations in HSPICE and see if that helps. Now the thing is in NGSPICE there is a transient noise source (TRNOISE) which I definitely need. Is there any way to do transient noise in HSPICE?

Thanks for all your help in advance.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top