Jun 9, 2016 #1 N Negneg Newbie level 6 Joined Apr 15, 2015 Messages 12 Helped 1 Reputation 2 Reaction score 1 Trophy points 3 Activity points 108 Dear All, A quick question! How can I measure the rise/fall time of a point in a subcircuit? For example: .MEASURE TRAN Tplh TRIG V(q) VAL='Supply/2' FALL=2 TARG V(qb) VAL='Supply/2' FALL=2 when 'q' and 'qb' are defined inside a subcircuit. Because running the above command, gives me this error: Trigger event is undefined. Please specify a valid event. Measure failed. Thanks,
Dear All, A quick question! How can I measure the rise/fall time of a point in a subcircuit? For example: .MEASURE TRAN Tplh TRIG V(q) VAL='Supply/2' FALL=2 TARG V(qb) VAL='Supply/2' FALL=2 when 'q' and 'qb' are defined inside a subcircuit. Because running the above command, gives me this error: Trigger event is undefined. Please specify a valid event. Measure failed. Thanks,
Jun 12, 2016 #2 erikl Super Moderator Staff member Joined Sep 9, 2008 Messages 8,108 Helped 2,695 Reputation 5,370 Reaction score 2,305 Trophy points 1,393 Location Germany Activity points 44,123 Use the netlist's equivalent node names.