Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to tranfer a pulse from a clock domain to another clock?

Status
Not open for further replies.

littlefield

Junior Member level 3
Joined
Jul 7, 2007
Messages
27
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,472
how to tranfer a pulse from a clock domain to another clock domain?
the frequence of both clocks are not define
and can't use fifo.
 

stevepre

Member level 4
Joined
May 10, 2001
Messages
78
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
595
Re: how to tranfer a pulse from a clock domain to another cl

this is a very practical and useful logic.

Let's say, you want to transfer a pulse in clock domain A (clka) into another pulse in clock domain B (clkb).

First, you make a "toggle" signal in clock domain A. That is, whenever there is a pulse, you toggle this signal.

Second, you double sync this "toggle" signal to clkb domain, let's call the synced signal toggle_sync2.

Third, you delay it again in clock domain b, and let's called it toggle_sync3

the pulse in clock domain b will be:
toggle_sync2 ^ toggle_sync3
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top