Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

HOW TO TEST SI9948 MOSFET?

Status
Not open for further replies.

satyak

Newbie level 4
Newbie level 4
Joined
Mar 15, 2010
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
hyderabad
Activity points
1,309
TESTING MOSFET

HI,

HOW TO TEST SI9948 MOSFET AS A COMPONENT. IHAVE TO TEST ITS PARAMETERS AS PER MANUFACTURER DATA SHEET.

CAN ANY BODY HELP ME HOW TO DO IT? WAHT EQUIPMENTS ARE REQUIRED??

THANKS
SATYA
 

Re: TESTING MOSFET

:arrow:
**broken link removed**

Rgds,
IanP
:D
 

Re: TESTING MOSFET

Hi, are you testing to know if the mosfet is bad? All you need is your digital multimeter, the you select the diode sign, then you place you meter probes between the center pin and the last pin their will be a reading on the display and if their is no reading you reverse the polarity of the probe, but normaly the gate does'nt read any resistance between the drain or source, but if the mosfet gate is on the meter will display the RDS on.

Added after 3 minutes:

Also get some text book ie. The art of electronics it will help you.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top